Mustang Forum

Technical & General Discussion Area => Technical - General => Topic started by: Wharfie66 on June 10, 2019, 05:21:38 PM

Title: Back Seat / Trunk Space
Post by: Wharfie66 on June 10, 2019, 05:21:38 PM
Hi guys,

Just after a bit of advice. Has anyone filled in the panel between the backseat and trunk space in NSW and is it legal to do so?

Thanks in advance
Fletch
Title: Re: Back Seat / Trunk Space
Post by: Dwayne on June 10, 2019, 06:07:19 PM
Very common, I put sheetmetal on mine.
Title: Re: Back Seat / Trunk Space
Post by: GLENN 70 on June 10, 2019, 09:22:21 PM
I did the same to one of my mustangs years ago but with a sheet of alloy   . I bolted it in and it did 2 things , 1 made it quieter in the cabin and made the body more ridged . I put carpet on both sides as well .
Title: Re: Back Seat / Trunk Space
Post by: gbader on June 11, 2019, 10:25:12 AM
yep - and actually a requirement for some events (if you have a fuel cell in the rear),  just riveted in sheet metal - have not yet done the space under the guards (a little trickier) but needed to fully seal the boot