Mustang Forum

Technical & General Discussion Area => Restomods => Topic started by: AussiePhil on June 03, 2019, 04:14:58 PM

Title: 68 mustang intake
Post by: AussiePhil on June 03, 2019, 04:14:58 PM
[img]<a href='https://postimg.cc/QV64pQW4' target='_blank'><img src='https://i.postimg.cc/QV64pQW4/20190505-084140.jpg' border='0' alt='20190505-084140'/></a>/img]
Title: Re: 68 mustang intake
Post by: AussiePhil on June 03, 2019, 04:15:59 PM
Hi, after some time looking for an Edelbrock ED7128 without luck I've fitted an Edelbrock ED29285 intake manifold and an Edelbrock low profile elbow ED3847.

It's come out great.

I needed to also use a low profile distributor,  in this case an ICE 8+1 camshaft sensor.

Just thought you like a look.
Cheers Phil.