trickflow heads for fe.

Mustang Australia

Author Topic: trickflow heads for fe.  (Read 463 times)

Offline tired69

  • Stallion
  • **
  • Posts: 73
  • Location: central coast
trickflow heads for fe.
« on: May 12, 2020, 11:23:46 AM »
Hi there has anybody used trickflow heads on a 390 fe if so  are they any good .
cheers .

Offline jiffy

  • Supercharged
  • *****
  • Posts: 2010
  • Location: Melbourne
Re: trickflow heads for fe.
« Reply #1 on: May 14, 2020, 09:00:56 PM »
I have heard good things about them.

As an alternative, if you;re rebuilding your 390, I have a spare pair of 428CJ heads, a spare CJ crankshaft that would add some beans to the mix.

Your existing rods could be used, get a set of 410 pistons for the extra stroke, and a nice light 4-barrel intake manifold and you'd be away (a little faster than before...)

Food for thought, no drama if that's not of interest...
Black '69 CJ 4SPD car under construction (425/504)
Black 2002 SVT Cobra - 2003 Terminator Clone (575rwhp/716rwtq)
Black 63.5 Galaxie 4SPD fastback (just you wait...)

Offline 69candy

  • Worked
  • ***
  • Posts: 663
Re: trickflow heads for fe.
« Reply #2 on: May 15, 2020, 05:54:53 PM »
I'm running BBM heads on mine. Nice bit of gear.   https://bearblockmotors.com/bbm-ford-fe-cylinder-heads/ I like the fact that all original gear bolts to it and the exhaust location is the same as stock.

Offline tired69

  • Stallion
  • **
  • Posts: 73
  • Location: central coast
Re: trickflow heads for fe.
« Reply #3 on: May 23, 2020, 09:20:10 PM »
hey thanks guys.
hey 69 candy with those bbm heads what cam and rockers did you run did you buy complete heads  or source  valves etc here.
cheers.

Offline 69candy

  • Worked
  • ***
  • Posts: 663
Re: trickflow heads for fe.
« Reply #4 on: May 24, 2020, 06:39:23 PM »
pm sent, Compete heads

 

Visit Custom Mustangs