WANTED: 1965 Mustang fold down seat moulding

Mustang Australia

Author Topic: WANTED: 1965 Mustang fold down seat moulding  (Read 803 times)

Offline 65FastbackAcodeRestoration

  • Thoroughbred
  • **
  • Posts: 145
  • Location: Adelaide

Hi there everyone-Iím after any of the following 3 sections of the fold down seat moulding -particularly the sharp right angled corner one as mine is missing the corner-let me know if you have one laying around collecting dust-donít mind if repro or original -cheers

Offline HRTZ65

  • Stallion
  • **
  • Posts: 57
  • Location: Highett
Re: WANTED: 1965 Mustang fold down seat moulding
« Reply #1 on: January 09, 2020, 08:32:15 AM »
i maybe able to help. i'll check on the weekend.

Offline 65FastbackAcodeRestoration

  • Thoroughbred
  • **
  • Posts: 145
  • Location: Adelaide
Re: WANTED: 1965 Mustang fold down seat moulding
« Reply #2 on: January 09, 2020, 06:33:17 PM »
Thanks HRTZ65 hear from you soon

Offline 67FBGT

  • Blue Printed
  • ****
  • Posts: 1069
  • Location: Brisbane Qld
Re: WANTED: 1965 Mustang fold down seat moulding
« Reply #3 on: January 09, 2020, 10:32:53 PM »
I'm not sure due to the photo shadowing, are those sections black painted? Some cars/years got black, others got chrome.
IIRC I have a couple of spares stashed away since 15yrs, will have to dig them out to see which sections they are.
« Last Edit: January 09, 2020, 10:34:48 PM by 67FBGT »

Offline 65FastbackAcodeRestoration

  • Thoroughbred
  • **
  • Posts: 145
  • Location: Adelaide
Re: WANTED: 1965 Mustang fold down seat moulding
« Reply #4 on: January 10, 2020, 01:02:20 PM »
Their badly pitted but chrome here is a closer image of the two smaller pieces 1 of which has a corner missing ...

Offline 67FBGT

  • Blue Printed
  • ****
  • Posts: 1069
  • Location: Brisbane Qld
Re: WANTED: 1965 Mustang fold down seat moulding
« Reply #5 on: January 10, 2020, 08:29:43 PM »
If they're pitted then they will be much work / $$$ to re-chrome as the sections are quite thin. Better to obtain the black painted ones, if you can, and get them chromed. Been there, done that.
Probably better yet though to just buy a nice new fresh set, for example Custom Mustangs do them, no doubt other suppliers too.

Offline 65FastbackAcodeRestoration

  • Thoroughbred
  • **
  • Posts: 145
  • Location: Adelaide
Re: WANTED: 1965 Mustang fold down seat moulding
« Reply #6 on: January 15, 2020, 01:58:38 PM »
The rest of the set polished up ok itís just two pitted pieces and 1 broken piece so seems a shame to waste the rest of a set! If I can find all 3 of these in driver condition that would be ideal

 

Visit Custom Mustangs