Another radiator fan question

Mustang Australia

Author Topic: Another radiator fan question  (Read 1039 times)

Online Dingo80

  • Worked
  • ***
  • Posts: 359
  • Location: Perth
  • Name: Kyle
Re: Another radiator fan question
« Reply #25 on: October 10, 2019, 10:58:08 AM »
Saw your 66 at the show Colin, but you weren't around. I have had a bit of a play and the BA fans actually fit really nicely with the top lip removed and trimming off the mounting brackets. I flipped it upside down also as it looks a lot neater. Just got to bend up some brackets now and all should be good.

Thanks everyone for their help.

Offline pgold

  • Stallion
  • **
  • Posts: 56
  • I'm new here
  • Location: Brisbane
  • Name: Paul Gold
Re: Another radiator fan question
« Reply #26 on: October 10, 2019, 07:12:36 PM »
Hi Kyle, I used 20mm X 20mm aluminium angle from Bunnings and 1/8 pop rivets and washers to fix to sides of shroud. I used the captive nuts from my old Radiator on the left side.
Cheers Paul.

Offline USA066

  • Worked
  • ***
  • Posts: 308
  • Robbo
  • Location: Bunbury WA
  • Name: Colin
Re: Another radiator fan question
« Reply #27 on: October 10, 2019, 08:02:07 PM »
Hi Kyle, I was probably working on the gate or something. The day went by so fast. Sorry I missed you but glad that you seem to have it sorted. Hope to see you at a future MOCWA event. Cheers
2007 GT Convertible
2008 Bullitt
1966 Coupe

 

Visit Custom Mustangs

Visit Custom Mustangs