Author Topic: care turns over but does not start when I turn on ignition (mustang 66 GT)  (Read 380 times)

0 Members and 1 Guest are viewing this topic.

Offline NigelMarkov

  • L Plates
  • *
  • Posts: 1
  • I'm new here
  • Location: Elsternwick
  • Name: Nigel
  • Car: 66 Mustang Convertible GT
I have just completed replacing the ignition switch and I have previously replaced the solenoid. The reason for replacing these parts is that the engine would not turn off when I turned off the ignition. I had to disconnect the battery to turn the motor off.
Today, after completing the ignition switch I started the car and it started the first time. When I turned off the ignition the motor kept on running. I disconnected the battery to shut down the motor.
When I went to start the car again the motor turned over but would not start.
Has anyone experienced the same problems?

Offline BAC

  • Blue Printed
  • ****
  • Posts: 1894
  • Location: Melbourne
  • Name: Brian
  • Car: '71 M code auto
Have you checked to make sure the power to the coil is cut when the ignition switch is in the 'off' position?


Visit Custom Mustangs