« previous next »
Pages: [1]   Go Down

Author Topic: RTA Mustang plates  (Read 1349 times)

0 Members and 1 Guest are viewing this topic.

Offline wiradjuri

  • Pony
  • **
  • Posts: 16
  • I'm new here
  • Location: NSW
  • Car: 2017 GT
RTA Mustang plates
« on: November 16, 2018, 01:36:05 PM »
G"Day All,
New here and have a oct 2017 mustang, she only has 1800 klms on her so far.
question is do the plates from the NSW rta American style mustang plates fit on the car.??
Regards
Wiradjuri
Logged

Offline wiradjuri

  • Pony
  • **
  • Posts: 16
  • I'm new here
  • Location: NSW
  • Car: 2017 GT
Re: RTA Mustang plates
« Reply #1 on: November 16, 2018, 07:04:43 PM »
G"Day All,
I just checked the spare surrounds that came with my vehicle and they are correct fit for the NSW plate,from dealership.
flat faced with front curved and rear flast, screw plates to these and then have holes lined up for RTA standard hole space,winning, even came with screws.
Regards
Native
Logged

Offline GT4951

  • GT 4951
  • P Plates
  • *
  • Posts: 7
  • On the learning curve
  • Location: Mosman NSW
  • Name: Aubrey
  • Car: 2017 GT manual
Re: RTA Mustang plates
« Reply #2 on: November 17, 2018, 08:06:50 AM »
Logged
2017 GT, Magnetic, manual: GT350 CAI & TB, Lund Flex tuned * FP Track Handling Pack * FP Strut Tower Brace * FP Short Throw Shifter * FP GT 350 Steering Wheel * FP Gas struts * 2018 Rear Deck Lid * Best Mufflers Axle Back * JL Audio amp & subwoofer * Focal Flax Component and rear speakers * BlackVue 650 front & rear * Steeda clutch spring * JLT Oil catch can * LED & HID upgrade and side markers * Window and lens tint * CQuartz paint treatment * G2G stripes * Carbon Fibre dash wrap * Front light tinted covers * TriboTEX * EPM v3.3 Rear brake sequencers * Genuine spare wheel.

Offline fisste

  • L Plates
  • *
  • Posts: 4
  • I'm new here
  • Location: sydney
Re: RTA Mustang plates
« Reply #3 on: November 18, 2018, 11:32:55 AM »
Don't use the surrounds that came with the car. Mount the Mustang American plates directly to the car. Dealer did mine. Then get a set of Altrex plate covers. Plates come from RTA
Logged

Offline wiradjuri

  • Pony
  • **
  • Posts: 16
  • I'm new here
  • Location: NSW
  • Car: 2017 GT
Re: RTA Mustang plates
« Reply #4 on: November 18, 2018, 09:43:22 PM »
G"Day Mate,
Why do you suggest I not use them.??
Regards
Wiradjuri
Logged

Offline wiradjuri

  • Pony
  • **
  • Posts: 16
  • I'm new here
  • Location: NSW
  • Car: 2017 GT
Re: RTA Mustang plates
« Reply #5 on: December 05, 2018, 03:18:36 PM »
G"Day Fisste,
Now I know why the ones that come with it you don't use, they are to big , wrong curve at front and the plates hole spacings on nsw plates are different widths and these NSW Mustang plates come with absolutely no holes at all in them.
Im distraught, new mustang plates and cant just fit them straight up.
I don't know what to do.??
Even the back spacings will put a screw straight through the pony,WTF.??
Any ideas.?
Regards
Wiradjuri.
Logged

Offline SXTY8

  • Worked
  • ***
  • Posts: 341
Re: RTA Mustang plates
« Reply #6 on: December 05, 2018, 05:42:04 PM »
How about getting some hard plastic or other material and screwing it to your car and the pop rivet your plate to it?
Logged

Offline wiradjuri

  • Pony
  • **
  • Posts: 16
  • I'm new here
  • Location: NSW
  • Car: 2017 GT
Re: RTA Mustang plates
« Reply #7 on: December 05, 2018, 07:50:01 PM »
G"Day All,
Ive been brain stormin all arvo and found that the supplied front and rear holders can fit with a bit of work and no need to drill the plates.
The front plastic holder lined up when I worked out it needed to be lower and I can attach the plate to it with some sort of adhesive and the rear one needed to have some holes drilled in it high as I could get them at the correct distance and it fits and I can still get to the boot button.
bunnings for some  longer screws and washers tomozz and then should be all good.
Fingers crossed.
Regards
Wiradjuri
Logged

Offline Pete Gala

  • Pony
  • **
  • Posts: 30
  • Location: Sydney
  • Name: Peter
  • Car: 2017 Mustang GT
Re: RTA Mustang plates
« Reply #8 on: March 25, 2019, 01:45:57 PM »
You didnt want to buy the mount ?

They butchered mine man... now I am stuck with it as they drilled straight into the bumper even after I told them not to...
Logged
Pages: [1]   Go Up
« previous next »
 

Visit Custom Mustangs