Author Topic: right hand conversion using falcon done car  (Read 831 times)

0 Members and 1 Guest are viewing this topic.

Offline tired69

  • Stallion
  • **
  • Posts: 68
  • Location: central coast
right hand conversion using falcon done car
« on: October 15, 2018, 05:22:08 PM »
Hi all.
has any body out there used  falcon fire wall and all parts required including  dash etc  and put in to a early model  stang I was wondering if you could  take out whole fire wall and cut and fit it in  instead  of chopping a mustang in to a hundred pieces  and going though all that drama.
just curious.

Offline Reborn67

  • Thoroughbred
  • **
  • Posts: 141
  • Location: Newcastle
  • Name: Andrew
  • Car: 67 Hardtop
Re: right hand conversion using falcon done car
« Reply #1 on: October 15, 2018, 07:48:33 PM »
Look up "Steering conversion" Mustang chat room June 3 2018, may be something there of help..,

Offline shaunp

  • GT 500
  • *********
  • Posts: 8311
  • Location: Brisbane
Re: right hand conversion using falcon done car
« Reply #2 on: October 16, 2018, 09:11:48 PM »
Hi all.
has any body out there used  falcon fire wall and all parts required including  dash etc  and put in to a early model  stang I was wondering if you could  take out whole fire wall and cut and fit it in  instead  of chopping a mustang in to a hundred pieces  and going though all that drama.
just curious.

Not really how you do it. Though can buy new RHD firewalls from mustang auto parts in Brisbane but they are just flat and you cant use Falcon pedals etc as easily , nor fit an AC unit. As for the original one you just leave the center and make new ends.

Offline scedd1

  • Worked
  • ***
  • Posts: 452
  • Location: Sunshine Coast QLD
  • Name: Steve
Re: right hand conversion using falcon done car
« Reply #3 on: October 17, 2018, 07:17:23 AM »
Frankenstang has the dash and all running gear from an ED Falcon in it
____________
./___ _ ____ ___ \.
 ( ]]] _ _ O _ _ [[[ )
\_ o _ _____ _ o _/
 |___|            |___|

Offline stormin

  • Blue Printed
  • ****
  • Posts: 1159
Re: right hand conversion using falcon done car
« Reply #4 on: October 17, 2018, 10:37:15 PM »
I was told about 15 years ago by someone who did conversions that a firewall out of a xa/xb/xc with about 100mm cut out of the middle will do the job. Maybe worth checking and measuring.
Stormin


Offline Harrycall

  • Stallion
  • **
  • Posts: 72
Re: right hand conversion using falcon done car
« Reply #6 on: November 26, 2018, 12:06:07 PM »
Does anyone know how to get in touch with "Tired69"?
I've sent him a message about a RHD Firewall i have that he might be able to use.
Wanted to give him first look at it before i put it up on Classifieds.

Thanks

Steve

 

Visit Custom Mustangs