Author Topic: Parts for sale new & 2nd hand. Mustangs windsor etc  (Read 824 times)

0 Members and 2 Guests are viewing this topic.

Offline jbb

  • Stallion
  • **
  • Posts: 73
Parts for sale new & 2nd hand. Mustangs windsor etc
« on: June 20, 2018, 12:41:12 AM »
Hi guys,
some mustang parts, some for a windsor and others.
new ad with many more parts listed
Prices listed, or make a reasonable offer.
Bulk buy for a discount,
Can send pics and assist with postage at your cost.

Brand new - - RH guard for 65/66 mustang

Brand new in box- - Innovate 3723 wideband AF ratio & data logger kit $275

Brand new in box- - Innovate 3780 XD -16 gauge kit for above $250

Brand new in box- - Nolethane 47207 rear spring pads $40

2nd hand Demon 650 carby with about 40 hrs use $350

2nd Hand - Hurst promatic 2 shifter setup, has all parts and cable but plastic console cut short ( available new for $90 ) Very little use and shifts like new.$200

2nd Hand Autometer 6856 monster tacho 5" Procomp Ultralite shift light needs lamp - $290

2nd Hand - Autometer 4313 Procomp Ultralite 0-15psi fuel pressure gauge complete with 5376 fuel isolator and braided hose $200

2nd Hand - Paxton cast aluminium carby enclosure and pipe $200

2nd Hand - Race Pumps fuel regulator with boost reference $100

2nd Hand - Carter P4601HP elec fuel pump 15psi $90

Brand new - Carter P4594 elec fuel pump $130

Brand new - Aluminium surge tank with Bosch 044, LP pump and filter, made to mount behind diff in front of fuel tank $220


Brand new in box- - B&M 70297 trans cooler with fan and therm sensor- Cost $450 sell $300

Brand new in box- Pair of Moog ES336R tie rod ends for 65/66 V8 manual steering $100

2nd Hand - auto trans cooler aeroflow 280 x 250mm excellent condition $100

2nd hand -Pacemaker 4010 headers for a windsor engine. excellent condition from my RHD 67 . cleared steering etc well. $400

Brand new Haltech HT-010304 Coolant temp sensor and plug 1/8NPT $40

Brand new in box- for 5.0 windsor - Edelbrock 90mm throttle body part number 36017 new it cost around $550 sell for $475 ono

Brand new in box- for 5.0 windsor - Idle air control valve part number 38183 new it cost around $190 sell for $120

Brand new in box- for 5.0 windsor - fuel rail kit part number 3621 new it cost around $240 sell for $200 ono

Brand new 66 convertible full RH quarter panel still in box $200

Brand new 66 Radiator support $80

Brand new in box- Fenix brand 52mm alloy radiator suit late model falcon was $450 new sell for $200 can get pics and dimensions if required.would fit a 65-67 mustang

Brand New in Box Holley regulator 4 1/2 -9 psi PN 12-803 ,sell for $50

2nd hand in great cond.Carter mechanical fuel pump - boost referenced PN M6094 sell for $50

Brand New in box Aeromotive fuel injection rail kit PN 14122 - suits 1998-2004 4.6DOHC engine , 5.4 falcon (maybe others) Red anodised with hoses and fittings worth around $850 new so sell it for $350ono

Brand new .SCT 90mm MAF ,model SCA2600- will sell $200

brand new in packet SCT XF3 hand controller/flash tuner PN 3015 , around $500 new - sell for $250

Thanks
Jbb

Online fredm666

  • Thoroughbred
  • **
  • Posts: 145
  • hoping for the best but expecting the worst
  • Location: NSW
  • Name: federico
  • Car: 1964-1/2, D code
Re: Parts for sale new & 2nd hand. Mustangs windsor etc
« Reply #1 on: June 20, 2018, 10:09:18 AM »
Hi Jbb,
where are you located?

thanks
fred

Offline J.hatzivalsamis

  • Thoroughbred
  • **
  • Posts: 168
  • I'm new here
  • Location: Darwin
  • Name: jimmy hatziv
Re: Parts for sale new & 2nd hand. Mustangs windsor etc
« Reply #2 on: June 20, 2018, 11:44:07 AM »
Hi JBB interested in the carby could you send me some pics. please 0417884779 Jim.

Online Dwayne

  • Blue Printed
  • ****
  • Posts: 1131
  • Location: Radelaide
  • Name: Dwayne
Re: Parts for sale new & 2nd hand. Mustangs windsor etc
« Reply #3 on: June 20, 2018, 12:04:14 PM »
Hi Jbb,
where are you located?

thanks

He's near Canberra I think

Offline jbb

  • Stallion
  • **
  • Posts: 73
Re: Parts for sale new & 2nd hand. Mustangs windsor etc
« Reply #4 on: June 20, 2018, 01:23:28 PM »
Hi Jbb,
where are you located?

thanks

 Just outside Canberra

Jbb

Offline jbb

  • Stallion
  • **
  • Posts: 73
Re: Parts for sale new & 2nd hand. Mustangs windsor etc
« Reply #5 on: June 20, 2018, 01:24:06 PM »
Hi JBB interested in the carby could you send me some pics. please 0417884779 Jim.

Hi Jim.
 will do tonight when I get home.


Jbb

Offline jbb

  • Stallion
  • **
  • Posts: 73
Re: Parts for sale new & 2nd hand. Mustangs windsor etc
« Reply #6 on: June 21, 2018, 11:03:33 AM »
pictures sent

Offline jbb

  • Stallion
  • **
  • Posts: 73
Re: Parts for sale new & 2nd hand. Mustangs windsor etc
« Reply #7 on: June 28, 2018, 07:22:37 PM »
tail light panel and tie rods sold

thx

Offline jbb

  • Stallion
  • **
  • Posts: 73
Re: Parts for sale new & 2nd hand. Mustangs windsor etc
« Reply #8 on: June 30, 2018, 09:32:41 AM »
Hi guys.

surge tank setup sold - pending payment

B&M 70297 cooler sold- pending payment

Thx
jbb

Offline jbb

  • Stallion
  • **
  • Posts: 73
Re: Parts for sale new & 2nd hand. Mustangs windsor etc
« Reply #9 on: July 08, 2018, 09:45:43 PM »
Hi guys.
 couple items added and some now sold.

Check out whats still for sale

 

Visit Custom Mustangs