Author Topic: 69 Mach 1 Stripes  (Read 274 times)

0 Members and 1 Guest are viewing this topic.

Offline Shep69

  • Thoroughbred
  • **
  • Posts: 189
69 Mach 1 Stripes
« on: January 04, 2018, 06:13:24 PM »
Has anyone purchased a set of stripes for their 69 from First Stripes in Sydney . Just wanted to know of the quality,  if they are ok and fit well.

I purchased a set from Mustang Market in the US and they are pretty much unusable. They sent me two right hand door pieces . As the stripe kit tapers they can only be fitted one way. Also most of the pieces are to short and won't allow for the stripes to go around the end of the panels like they did from the factory. Now MM  won't even get back to me. Pretty disappointing all round.

Offline BAC

  • Blue Printed
  • ****
  • Posts: 1325
  • Location: Melbourne
  • Name: Brian
  • Car: Mustangless!
Re: 69 Mach 1 Stripes
« Reply #1 on: January 05, 2018, 09:36:18 AM »
I've not bought from them, but had good success with the US company Class Tech Cars who sell on Ebay under the user ID  jackjilli.

Before you buy a complete new set, if you let us know the pieces and colour scheme someone here may have what you need.  I think I still have quite a few pieces of both black/gold and gold/white.
Cheers,
Brian

Offline jiffy

  • Blue Printed
  • ****
  • Posts: 1706
  • Location: Melbourne
Re: 69 Mach 1 Stripes
« Reply #2 on: January 06, 2018, 02:28:20 PM »
What colour do you need - I have a couple of sets of original Black/Gold stripes that I probably won't be using if that helps?
'69 CJ 4SPD car under contruction
2002 SVT Cobra - 2003 Terminator Clone

U2U, email or phone me 0423 977 057

 

Visit Custom Mustangs