Author Topic: ECU's  (Read 1260 times)

0 Members and 1 Guest are viewing this topic.

Offline Azz67

  • Thoroughbred
  • **
  • Posts: 154
  • Location: Gold Coast
ECU's
« on: April 04, 2016, 08:07:29 AM »
Hey all
I have an eec-iv ecu in my 67. The original trans was an auto and 6 odd months ago I changed over to a t5. My question is are there different variants of ecus depending on if its auto or manual. Its a 3dfa model ecu. I'm wondering if its the cause of my recent random stalling issues as I pulled the ecu today and found a capacitor burnt out. The 47uf 16v one. From what I've read this capacitor problem could lead to a whole host of issues that I'm currently going through.
Thanks for any assistance fellas.
Cheers
C.

Offline Husky65

  • Worked
  • ***
  • Posts: 810
  • I'm new here
Re: ECU's
« Reply #1 on: April 05, 2016, 06:11:52 AM »
I know the Australian eeciv and eecv are different for auto and manual. Funnily enough idle will suffer and occasional stalling. I believe there are two parameters that need changing. You can get a j3 chip from someone like ti performance that will make an auto ford eec work on a manual.

 

Visit Custom Mustangs